Version
7.5.1.0
6.2.1.1
Example
Dell(conf-if-vl-100)#show config
!
interface Vlan 100
Dell(conf-if-vl-100)#
show vlan
Display the current VLAN configurations on the switch.
Z9500
Syntax
show vlan [brief | id vlan-id | name vlan-name]
Parameters
brief
id vlan-id
name vlan-
name
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
Layer 2
Description
Introduced on the C-Series.
Introduced on the E-Series.
no ip address
no shutdown
(OPTIONAL) Enter the keyword brief to display the
following information:
•
VLAN ID
•
VLAN name (left blank if none is configured)
•
Spanning Tree Group ID
•
MAC address aging time
•
IP address
(OPTIONAL) Enter the keyword id and VLAN ID number
from 1 to 4094 to display the configuration of the specified
VLAN.
(OPTIONAL) Enter the keyword name and the name assigned
to a VLAN. Only information on the specified VLAN is
displayed.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
1157