Radius-Server Host - Dell Z9500 Command Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

radius-server host

Configure a RADIUS server host.

radius-server host {hostname | ipv4-address | ipv6-address}

[auth-port port-number] [retransmit retries] [timeout seconds]

[key [encryption-type] key]

ipv4-address |

ipv6-address

auth-port port-

[encryption-

Not configured.

Introduced on the E-Series.

Enter the name of the RADIUS server host.

Enter the IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X)

of the RADIUS server host.

(OPTIONAL) Enter the keywords auth-port then a number

as the port number. The range is from zero (0) to 65535. The

default port-number is 1812.

(OPTIONAL) Enter the keyword retransmit then a number

as the number of attempts. This parameter overwrites the

radius-server retransmit command. The range is

from zero (0) to 100. The default is 3 attempts.

(OPTIONAL) Enter the keyword timeout then the seconds

the time interval the switch waits for a reply from the RADIUS

server. This parameter overwrites the radius-server

timeout command. The range is from 0 to 1000. The

default is 5 seconds.

(OPTIONAL) Enter the keyword key then an optional

encryption-type and a string up to 42 characters long as the

authentication key. The RADIUS host server uses this

authentication key and the RADIUS daemon operating on

this switch.

For the encryption-type, enter either zero (0) or 7 as the

encryption type for the key entered. The options are:

0 is the default and means the password is not encrypted

and stored as clear text.

7 means that the password is encrypted and hidden.

Configure this parameter last because leading spaces are