Ipv6 Ospf Encryption - Dell Z9500 Command Reference Manual

ipv6 ospf encryption

Configure an IPsec encryption policy for OSPFv3 packets on an IPv6 interface.
Z9500
Syntax
ipv6 ospf encryption {null | ipsec spi number esp encryption-
algorithm [key-encryption-type] key athentication-algorithm
[key-encryption-type] key}}
Parameters
null
ipsec spi
number
esp
encryption-
algorithm
key-
encryption-
type
key
authentication-
algorithm
key-
encryption-
type
key
Open Shortest Path First (OSPFv2 and OSPFv3)
Causes an encryption policy configured for the area to not
be inherited on the interface.
Security Policy index (SPI) value that identifies an IPsec
security policy. The range is from 256 to 4294967295.
Encryption algorithm used with ESP.
Valid values are: 3DES, DES, AES-CBC, and NULL.
For AES-CBC, only the AES-128 and AES-192 ciphers are
supported.
(OPTIONAL) Specifies if the key is encrypted.
Valid values: 0 (key is not encrypted) or 7 (key is encrypted).
Text string used in authentication.
The required lengths of a non-encrypted or encrypted key
are:
3DES - 48 or 96 hex digits; DES - 16 or 32 hex digits; AES-
CBC -32 or 64 hex digits for AES-128 and 48 or 96 hex digits
for AES-192.
Specifies the authentication algorithm to use for encryption.
Valid values are MD5 or SHA1.
(OPTIONAL) Specifies if the authentication key is encrypted.
Valid values: 0 (key is not encrypted) or 7 (key is encrypted).
Text string used in authentication.
For MD5 authentication, the key must be 32 hex digits (non-
encrypted) or 64 hex digits (encrypted).
1349