Logging Monitor - Dell Z9500 Command Reference Manual

Usage When the number of messages reach the limit you set with the logging history
Information
size command, older messages are deleted as newer ones are added to the table.
Related
show logging
Commands

logging monitor

Specify which messages are logged to Telnet applications.
Z9500
Syntax
logging monitor [level]
To disable logging to terminal connections, use the no logging monitor
command.
Parameters
level
Defaults 7 or debugging
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
Related
default logging monitor
Commands
setting.
1740
— displays information logged to the history buffer.
Indicate a value from 0 to 7 or enter one of the following
parameters: emergencies, alerts, critical, errors,
warnings, notifications, informational, or
debugging. The default is 7 or debugging.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— returns the logging monitor parameters to the default
Simple Network Management Protocol (SNMP) and Syslog