Description - Dell Z9500 Command Reference Manual

Version
8.3.19.0
8.3.12.0
8.4.2.3
Related clear ufd-disable
Commands Error state.

description

Enter a text description of an uplink-state group.
Z9500
Syntax
description text
Parameters
text
Defaults none
Command UPLINK-STATE-GROUP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.4.2.3
Example
Dell(conf-uplink-state-group-16)# description test
Dell(conf-uplink-state-group-16)#
Related uplink-state-group
Commands upstream links.
Uplink Failure Detection (UFD)
Description
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the S-Series S50.
— re-enables downstream interfaces that are in a UFD-Disabled
Text description of the uplink-state group. The maximum
length is 80 alphanumeric characters.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the S-Series S50.
— creates an uplink-state group and enables the tracking of
1815