Clear Ipv6 Route - Dell Z9500 Command Reference Manual

clear ipv6 route

Clear (refresh) all or a specific route from the IPv6 routing table.
Z9500
Syntax
clear ipv6 route [vrf vrf-name] {* | ipv6-address prefix-
length}
Parameters
vrf vrf-name
*
ipv6-address
prefix-length
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.0.0.0
8.3.19.0
8.3.7.0
8.2.1.0
7.8.1.0
7.4.1.0
1014
(Optional) Enter the keyword vrf followed by the name of the
VRF to clear the IPv6 routes corresponding to that VRF.
Enter the * to clear (refresh) all routes from the IPv6 routing
table.
Enter the IPv6 address in the x:x:x:x::x format then the prefix
length in the /x format. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Description
Added support for VRF.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series and S-Series.
Introduced on the E-Series TeraScale.
IPv6 Basics