Description - Dell Z9500 Command Reference Manual

Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.5.1.0
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Example
Dell#debug spanning-tree rstp bpdu tengigabitethernet 2/0 ?
in Receive (in)
out Transmit (out)

description

Enter a description of the rapid spanning tree.
Z9500
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description
Defaults none
Command SPANNING TREE (The prompt is "config-rstp".)
Modes
Rapid Spanning Tree Protocol (RSTP)
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter a description to identify the rapid spanning tree (80
characters maximum).
1579