Timeout Login Response - Dell Z9500 Command Reference Manual

Version
7.6.1.0
7.5.1.0
6.1.1.0
Usage The following describes the show userscommand shown in the following
Information
example.
Field
(untitled)
Line
User
Host(s)
Location
Example
Dell#show users
Authorization Mode:
Line
0 console 0
*3 vty 1
4 vty 2
Related username
Commands

timeout login response

Specify how long the software waits for the login input (for example, the user name and password) before
timing out.
Z9500
Syntax
timeout login response seconds
To return to the default values, use the no timeout login response
command.
Parameters
seconds
Security
Description
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Indicates with an asterisk (*) which terminal line you are
using.
Displays the terminal lines currently in use.
Displays the user name of all users logged in.
Displays the terminal line status.
Displays the IP address of the user.
role or privilege
User Role
admin sysadmin
sec1 secadmin
ml1 netadmin
— enables a user.
Enter a number of seconds the software waits before logging
you out. The range is:
• VTY: the range is from 1 to 30 seconds, the default is 30
seconds.
• Console: the range is from 1 to 300 seconds, the default
is 0 seconds (no timeout).
Privilege Host(s) Location
15 idle
14 idle
12 idle
172.31.1.4
172.31.1.5
1625