Sflow Max-Header-Size Extended - Dell Z9500 Command Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Dell Networking OS version 7.8.1.0 and later enhances the sflow implementation

for real time traffic analysis on the E-Series to provide extended gateway

information in cases where the destination IP addresses are learned by different

routing protocols and for cases where the destination is reachable over ECMP.

sflow max-header-size extended

Set the maximum header size of a packet to 256 bytes.

sflow max-header-size extended

To reset the maximum header size of a packet, use the[no] sflow max-

header-size extended command.

CONFIGURATION

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on S-Series Stacking.

Introduced on the E-Series ExaScale.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

— displays the sFlow configuration.

Enter the keyword extended to copy 256 bytes from the

sample packets to sFlow datagram.