Dell Z9500 Command Reference Manual page 1667

port port-
number
[version {1 | 2}]
Defaults
•
•
•
•
•
•
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.5(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
Security
•
diffie-hellman-group14-sha1
(OPTIONAL) Enter the keyword port then the port number
of the listening port of the SSH server. The range is from 1 to
65535. The default is 22.
(OPTIONAL) Enter the keyword version then the SSH
version 1 or 2 to specify only SSHv1 or SSHv2.
Default listening port is 22.
Default cipher list is 3des-cbc,aes128-cbc,aes192-cbc,aes256-cbc,aes128-
ctr,aes192-ctr,aes256-ctr.
When FIPS is enabled, the default is hmac-sha1-96.
When FIPS is not enabled, the default is hmac-md5,hmac-md5-96,hmac-
sha1,hmac-sha1-96,hmac-sha2-256,hmac-sha2-256-96.
When FIPS is enabled, the default is diffie-hellman-group14-sha1.
When FIPS is not enabled, the default is diffie-hellman-group-exchange-
sha1,diffie-hellman-group1-sha1,diffie-hellman-group14-sha1.
Description
Introduced the cipher, kex and mac options on the Z9500.
Introduced the cipher, kex and mac options on the Z9000,
S6000, S4820T, S4810, and MXL.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
NOTE: If you enable FIPS mode, you can only select
version 2.
1667