Ntp Trusted-Key - Dell Z9500 Command Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.11.1
8.5.1.0
7.6.1.0
7.5.1.0
6.1.1.0

ntp trusted-key

Set a key to authenticate the system to which NTP synchronizes.
Z9500
Syntax
ntp trusted-key number
To delete the key, use the no ntp trusted-key number command.
Parameters
number
Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.11.1
7.6.1.0
7.5.1.0
6.1.1.0
System Time and Date
Description
Introduced on the Z9500.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter a number as the trusted key ID. The range is from 1 to
4294967295.
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1797