Show Logging Kernellog - Dell Z9500 Command Reference Manual

9:Task(tUsrRoot): [
10:Task(tUsrRoot): [
Usage This command displays internal software driver information, which may be useful
Information during troubleshooting switch initialization errors, such as a downed Port-Pipe.

show logging kernellog

Display the kernel log for the specified hardware component.
Z9500
Syntax
show logging kernellog {cp | rp | linecard slot-id}
Parameters
cp
rp
linecard slot-id
defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
Examples
Dell# show logging kernellog cp
00:00:02:326592:AHCI_P_SCTL(0x01ac)
00:00:02:326599:AHCI_P_SERR(0x01b0)
00:00:02:326605:AHCI_P_SACT(0x01b4)
00:00:02:655656:pca9555x3:pca9555_write: iic_smbus_write_byte
failed addr=0x20 cmd_reg=0x8 rv=5
00:00:02:656982:pca9555x3:pca9555_write: iic_smbus_write_byte
failed addr=0x20 cmd_reg=0x9 rv=5
00:00:02:659597:pca9555x3:pca9555_write: iic_smbus_write_byte
1750
Enter the keyword cp to display the kernel log for the
Control Processor on the switch.
Enter the keyword cp to display the kernel log for the Route
Processor on the switch.
Enter the linecard slot-id parameters to specify the
line-card ports for which you want to display the kernel log.
The range of line-card slot IDs is from 0 to 2.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
36]SS DRV DEBUG: port:28 isfanout:0
35]SS DRV DEBUG: port:32 isfanout:0
0x00000300
0x00000000
0x00000000
Simple Network Management Protocol (SNMP) and Syslog