Show Iscsi - Dell Z9500 Command Reference Manual

show iscsi

Display the currently configured iSCSI settings.
Syntax
show iscsi
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.6(0.0)
Example
Dell#show iscsi
iSCSI is enabled
iSCSI session monitoring is disabled
iSCSI COS : dot1p is 4 no-remark
Session aging time: 10
Maximum number of connections is 256
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port Target IP Address
3260
860
Related
•
Commands
•
•
show iscsi session
Display information about active iSCSI sessions on the switch.
Syntax
show iscsi session
Command
•
Modes
•
iSCSI Optimization
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
show iscsi session— displays information about active iSCSI sessions on the
switch.
show iscsi session detailed— displays detailed information about active iSCSI
sessions on the switch.
show run iscsi— shows run iscsi.
EXEC
EXEC Privilege
1051