Dell Z9500 Command Reference Manual page 1300

Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.1
Usage The following describes the show ip ospf process-id database command
Information
shown in the following example.
Field
Link ID
ADV Router
Age
Seq#
Checksum
Link count
Example
Dell>show ip ospf 1 database
Link ID
11.1.2.1
13.1.1.1
192.68.135.2 192.68.135.2 1419 0x80000294 0x9cbd
Link ID
10.2.3.2
10.2.4.2
1300
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support of Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Identifies the router ID.
Identifies the advertising router's ID.
Displays the link state age.
Identifies the link state sequence number. This number
allows you to identify old or duplicate link state
advertisements.
Displays the Fletcher checksum of an LSA's complete
contents.
Displays the number of interfaces for that router.
OSPF Router with ID (11.1.2.1) (Process ID 1)
Router (Area 0.0.0.0)
ADV Router
11.1.2.1
13.1.1.1
Network (Area 0.0.0.0)
ADV Router
13.1.1.1
192.68.135.2 908
Age Seq# Checksum Link count
673 0x80000005 0x707e
676 0x80000097 0x1035
Age Seq# Checksum
676 0x80000003 0x6592
0x80000055 0x683e
Open Shortest Path First (OSPFv2 and OSPFv3)
2
2
1