Show Spanning-Tree 0 - Dell Z9500 Command Reference Manual

Version
8.3.11.1
8.3.7.0
7.7.1.0
7.5.1.0
6.2.1.1
Example
Dell(config-stp)#show config
protocol spanning-tree 0
Dell(config-stp)#

show spanning-tree 0

Display the spanning tree group configuration and status of interfaces in the spanning tree group.
Z9500
Syntax
show spanning-tree 0 [active | brief | guard | interface
interface | root | summary]
Parameters
0
active
brief
guard
interface
interface
root
Spanning Tree Protocol (STP)
Description
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
no disable
Enter 0 (zero) to display information about that specific
spanning tree group.
(OPTIONAL) Enter the keyword active to display only active
interfaces in spanning tree group 0.
(OPTIONAL) Enter the keyword brief to display a synopsis
of the spanning tree group configuration information.
(OPTIONAL) Enter the keyword guard to display the type of
guard enabled on an STP interface and the current port state.
(OPTIONAL) Enter the keyword interface and the type
slot/port of the interface you want displayed. Type slot/port
options are the following:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
(OPTIONAL) Enter the keyword root to display configuration
information on the spanning tree group root.
1777