Name - Dell Z9500 Command Reference Manual

Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.5.1.0
Usage By default, all VLANs are mapped to MST instance zero (0) unless you use the vlan
Information
range command to map it to a non-zero instance.

name

The name you assign to the multiple spanning tree region.
Z9500
Syntax
name region-name
To remove the region name, use the no name command.
Parameters
region-name
Defaults no default name.
Command MULTIPLE SPANNING TREE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
1240
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
Enter the MST region name. The range is 32 character limit.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Multiple Spanning Tree Protocol (MSTP)