Vlan Hello-Time - Dell Z9500 Command Reference Manual

Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Related
vlan bridge-priority
Commands

vlan hello-time

vlan max-age
show spanning-tree pvst
vlan hello-time
Set the time interval between generation of PVST+ 7 BPDUs.
Z9500
Syntax
vlan vlan-range hello-time seconds
To return to the default value, use the no vlan hello-time command.
Parameters
vlan vlan-range
hello-time
seconds
Defaults 2 seconds
Command CONFIGURATION (conf-pvst)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1470
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
— sets the bridge-priority value.
— changes the time interval between BPDUs.
— changes the time interval before PVST+ refreshes.
— displays the PVST+ configuration.
Enter the keyword vlan then the VLAN numbers. The range
is from 1 to 4094.
Enter the keywords hello-time then the time interval, in
seconds, between transmission of BPDUs. The range is from
1 to 10 seconds. The default is 2 seconds.
Per-VLAN Spanning Tree Plus (PVST+)