Dell Z9500 Command Reference Manual page 1044

Version
8.2.1.0
7.8.1.0
7.4.1.0
Usage The following describes the show ipv6 route command shown in the following
Information examples.
Field
(undefined)
Destination
Gateway
Dist/Metric
Last Change
Example (S-
Dell#show ipv6 route
Series)
Codes: C - connected, L - local, S - static, R - RIP,
Locally Originated,
1044
Description
Introduced on the E-Series ExaScale.
Introduced on the C-Series and S-Series.
Introduced on the E-Series TeraScale.
Description
Identifies the type of route:
• L = Local
• C = connected
• S = static
• R = RIP
• B = BGP
• IN = internal BGP
• EX = external BGP
• LO = Locally Originated
• O = OSPF
• IA = OSPF inter-area
• N1 = OSPF NSSA external type 1
• N2 = OSPF NSSA external type 2
• E1 = OSPF external type 1
• E2 = OSPF external type 2
• i = IS-IS
• L1 = IS-IS level-1
• L2 = IS-IS level-2
• IA = IS-IS inter-area
• * = candidate default
• > = non-active route
• + = summary routes
Identifies the route's destination IPv6 address.
Identifies whether the route is directly connected and on
which interface the route is configured.
Identifies if the route has a specified distance or metric.
Identifies when the route was last changed or configured.
B - BGP, IN - internal BGP, EX - external BGP,LO -
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external
IPv6 Basics