Description - Dell Z9500 Command Reference Manual

description

Enter a description of the RIP routing protocol.
Z9500
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description
Defaults none
Command ROUTER RIP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.7.1.0
Related router rip
Commands
Routing Information Protocol (RIP)
Enter a description to identify the RIP protocol (80
characters maximum).
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— enters ROUTER mode on the switch.
1537