Show Run Iscsi - Dell Z9500 Command Reference Manual

Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.6(0.0)
Example
Dell# show isci session detailed
Session 0 :
---------------------------------------------------
Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-2c
Up Time:00:00:01:28(DD:HH:MM:SS)
Time for aging out:00:00:09:34(DD:HH:MM:SS)
ISID:806978696102
Initiator
IP Address TCP Port
10.10.0.44 33345
Session 1 :
----------------------------------------------------
Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-35
Up Time:00:00:01:22(DD:HH:MM:SS)
Time for aging out:00:00:09:31(DD:HH:MM:SS)
ISID:806978696102
Initiator
IP Address TCP Port
10.10.0.53 33432
Related
•
Commands
•
•

show run iscsi

Display all globally configured non-default iSCSI settings in the current Dell Networking OS session.
Syntax
show run iscsi
Command EXEC Privilege
Modes
iSCSI Optimization
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Initiator Target
Initiator Target
show iscsi— displays the currently configured iSCSI settings.
show iscsi session— displays information about active iSCSI sessions on the
switch.
show run iscsi — shows run iscsi.
Target
IP Address TCPPort ID
10.10.0.101 3260
Target
IP Address TCPPort ID
10.10.0.101 3260
Connection
0
Connection
0
1053