Dell Z9500 Command Reference Manual page 1417

Version
9.7(0.0)
9.5(0.1)
9.0.2.0
9.0(1.3)
8.3.19.0
8.3.12.0
7.4.1.0
Example
Dell#show ipv6 pim tib
PIM Multicast Routing Table
Flags: D - Dense, S - Sparse, C - Connected, L - Local, P -
Pruned,
Join SPT,
Advertisement
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(25::1, ff0e::225:1:2:1), uptime 00:09:53, expires
00:00:00,flags: CJ
fe80::201:e8ff:fe00:6265
(25::1, ff0e::225:1:2:2), uptime 00:09:54, expires
00:00:00,flags: CJ
fe80::201:e8ff:fe00:6265
(25::2, ff0e::225:1:2:2), uptime 00:09:54, expires
00:00:00,flags: CJ
fe80::201:e8ff:fe00:6265
(25::1, ff0e::226:1:2:1), uptime 00:09:54, expires
00:00:00,flags: CJ
fe80::201:e8ff:fe00:6265
Dell#
PIM-Sparse Mode (PIM-SM)
Description
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S5000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced
R - RP-bit set, F - Register flag, T - SPT-bit set, J -
M - MSDP created entry, A - Candidate for MSDP
K - Ack-Pending State
RPF neighbor: TenGigabitEthernet 1/3,
Outgoing interface list:
TenGigabitEthernet 2/11
RPF neighbor: TenGigabitEthernet 1/3,
Outgoing interface list:
TenGigabitEthernet 1/11
RPF neighbor: TenGigabitEthernet 1/3,
Outgoing interface list:
TenGigabitEthernet 1/11
RPF neighbor: TenGigabitEthernet 1/3,
Outgoing interface list:
TenGigabitEthernet 1/11
1417