Clock Timezone - Dell Z9500 Command Reference Manual

clock timezone

Configure a timezone for the switch.
Z9500
Syntax
clock timezone timezone-name offset
To delete a timezone configuration, use the no clock timezone command.
Parameters
timezone-
name
offset
Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage Coordinated universal time (UTC) is the time standard based on the International
Information Atomic Time standard, commonly known as Greenwich Mean time. When
determining system time, include the differentiator between UTC and your local
timezone. For example, San Jose, CA is the Pacific Timezone with a UTC offset of
-8.
1788
Enter the name of the timezone. You cannot use spaces.
Enter one of the following:
• a number from 1 to 23 as the number of hours in addition
to universal time coordinated (UTC) for the timezone.
• a minus sign (-) then a number from 1 to 23 as the
number of hours.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
System Time and Date