Default Logging Buffered - Dell Z9500 Command Reference Manual

default logging buffered

Return to the default setting for messages logged to the internal buffer.
Z9500
Syntax
default logging buffered
Defaults size = 40960; level = 7 or debugging
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
7.6.1.0
7.5.1.0
Related logging buffered
Commands
default logging console
Return the default settings for messages logged to the console.
Z9500
Syntax
default logging console
Defaults level = 7 or debugging
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
1730
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S-Series.
Introduced on the C-Series.
— sets the logging buffered parameters.
Description
Introduced on the Z9500.
Simple Network Management Protocol (SNMP) and Syslog