Clear Hardware Hg-Stats - Dell Z9500 Command Reference Manual

• Line-card slot 0 uses three NPUs numbered 0 to 2.
• Line-card slot 1 uses four NPUs numbered 0 to 3.
• Line-card slot 2 uses four NPUs numbered 0 to 3.
SFM NPUs are numbered 0 to 5.
Line-card and SFM NPUs use HiGig port channels to transmit data.
• An SFM NPU uses 11 HiGig port channels, one port channel to transmit data to each line-card NPU.
Each HiGig port channel in an SFM NPU consists of two HiGig links.
• A line-card NPU supports 12 front-end I/O ports and 12 backplane HiGig ports. The 12 backplane links
are members of a single HiGig port channel that connects the line-card NPU to each SFM NPU. Two
HiGig links in the port channel are used to connect to each SFM NPU.

clear hardware hg-stats

Clear traffic statistics from a HiGig port in a HiGig link bundle/port channel on a line-card or switch fabric
module (SFM) NPU.
Z9500
Syntax
clear hardware {sfm npu-id | linecard slot} hg-stats {port hg-
port—number | unit npu-id port hg-port—number}
Parameters
sfm npu-id
linecard slot
hg-stats {port
hg-port-
number | unit
npu-id port hg-
port-number}
Defaults none
Command EXEC Privilege
Modes
Command
Version
History
9.2.1.0
9.3.0.0
904
Specify a Z9500 SFM (spine) NPU by entering the keyword
sfm and SFM NPU ID. Valid SFM NPU IDs are 0 to 5.
Specify a Z9500 line-card (leaf) NPU by entering the
keyword linecard and line-card slot. Valid slot numbers
are 0 to 2.
Enter the keyword hg-stats to clear HiGig port statistics.
For an SFM NPU HiGig link bundle, specify only a HiGig port
number. Valid SFM hg-port-number values are 1 to 22.
For a line-card NPU HiGig link bundle, specify an NPU ID and
a HiGig port number. Line-card NPUs range from 0 to 3.
Line-card HiGig port numbers range from 50 to 61.
Description
Introduced on the Z9500 switch.
Added support for the hg-stats option on the Z9000
platform.
Interfaces