Show Ipv6 Pim Ssm-Range - Dell Z9500 Command Reference Manual

When the ACL rules change, the ACL manager and PIM modules apply the new
rules automatically.
When you remove the SSM ACL, the default range is restored. When you configure
the SSM range, the system supports SSM for the configured group range as well as
the default SSM range.

show ipv6 pim ssm-range

Display the non-default groups added using the SSM range feature.
Syntax
show ipv6 pim ssm-range
Command
•
Modes
•
Command
Version 9.5(0.1)
History
Version 7.4.1.0
Example
Dell(conf)#ipv6 pim ssm-range SSM_ACL
Dell(conf)#ipv6 access-list SSM_ACL
Dell(conf-ipv6-acl)#permit ipv6 any ff0e::225:1:2:0/112
Dell(conf-ipv6-acl)#
Dell(conf-ipv6-acl)#do show ipv6 pim ssm-range
Group Address / MaskLen
ff0e::225:1:2:0 / 112
Dell(conf-ipv6-acl)#
1422
EXEC
EXEC Privilege
Introduced on the Z9500.
Introduced on the E-Series.
PIM-Source Specific Mode (PIM-SSM)