Dell Z9500 Command Reference Manual page 1324

Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.4.(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
7.4.1.0
Usage The following describes the show ip ospf statistics process-id global
Information
command shown in the following example.
Row Heading
Total
Error
Hello
DDiscr
LSReq
LSUpd
LSAck
TxQ-Len
RxQ-Len
Tx-Mark
Rx-Mark
1324
EXEC
EXEC Privilege
Description
Introduced on the S6000-ON.
Added support for VRF.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the total number of packets the OSPF process
receives/transmits.
Displays the error count while receiving and transmitting
packets by the OSPF process.
Number of OSPF Hello packets.
Number of database description packets.
Number of link state request packets.
Number of link state update packets.
Number of link state acknowledgement packets.
The transmission queue length.
The reception queue length.
The highest number mark in the transmission queue.
The highest number mark in the reception queue.
Open Shortest Path First (OSPFv2 and OSPFv3)