Show Running-Config Rip - Dell Z9500 Command Reference Manual

Usage The following describes the show ip rip database command shown in the
Information
following example.
Field
Total number of
routes in RIP
database
100.10.10.0/24
directly
connected
150.100.0.0
redistributed
209.9.16.0/24...
Example
Dell#show ip rip database
Total number of routes in RIP database: 1624
204.250.54.0/24
204.250.54.0/24
203.250.49.0/24
203.250.49.0/24
210.250.40.0/24
210.250.40.0/24
207.250.53.0/24
207.250.53.0/24
208.250.42.0/24
208.250.42.0/24

show running-config rip

Display the current RIP configuration.
Z9500
Syntax
show running-config rip
Defaults none
Command EXEC Privilege
Modes
Routing Information Protocol (RIP)
Description
Displays the number of RIP routes stored in the RIP
database.
Lists the routes directly connected.
Lists the routes learned through redistribution.
Lists the routes and the sources advertising those routes.
[50/1] via 192.14.1.3, 00:00:12, TenGigabitEthernet 0/15
auto-summary
[50/1] via 192.13.1.3, 00:00:12, TenGigabitEthernet 0/14
auto-summary
[50/2] via 1.1.18.2, 00:00:14, Vlan 18
[50/2] via 1.1.130.2, 00:00:12, Port-channel 30
auto-summary
[50/2] via 1.1.120.2, 00:00:55, Port-channel 20
[50/2] via 1.1.130.2, 00:00:12, Port-channel 30
[50/2] via 1.1.10.2, 00:00:18, Vlan 10
auto-summary
[50/2] via 1.1.120.2, 00:00:55, Port-channel 20
[50/2] via 1.1.130.2, 00:00:12, Port-channel 30
[50/2] via 1.1.10.2, 00:00:18, Vlan 10
auto-summary
1557