Dot1X Auth-Server - Dell Z9500 Command Reference Manual

show dot1x interface

dot1x auth-server

Configure the authentication server to RADIUS.
Z9500
Syntax
dot1x auth-server radius
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.4.1.0
dot1x guest-vlan
Configure a guest VLAN for limited access users or for devices that are not 802.1X capable.
Z9500
Syntax
dot1x guest-vlan vlan-id
To disable the guest VLAN, use the no dot1x guest-vlan vlan-id command.
Parameters
vlan-id
Defaults Not configured.
Command CONFIGURATION (conf-if-interface-slot/port)
Modes
Security
— displays the 802.1X information on an interface.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
Enter the VLAN Identifier. The range is from 1 to 4094.
1643