Show Ip Pim Neighbor - Dell Z9500 Command Reference Manual

Field
Query Intvl
DR Prio
DR
The show ip pim interface command does not display information
corresponding to the loop-back interfaces.
Example
Dell#show ip pim interface
Address
165.87.34.5
165.87.34.5
10.1.1.2
10.1.1.2
20.1.1.5
20.1.1.5
165.87.31.200
165.87.31.201

show ip pim neighbor

View PIM neighbors.
Z9500
Syntax
show ip pim [vrf vrf-name] neighbor
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
1392
Description
Displays the query interval for Router Query messages on
that interface (configured with ip pim query-interval
command).
Displays the Designated Router priority value configured on
the interface (use the ip pim dr-priority command).
Displays the IP address of the Designated Router for that
interface.
Interface Ver/
Te 1/10
Vl 10
Vl 20
Vl 30
EXEC
EXEC Privilege
Description
Added support for VRF. Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Nbr Query
Mode Count Intvl
v2/S 0 30
v2/S 1 30
v2/S 1 30
v2/S 1 30
DR DR
Prio
1
1
1
1
PIM-Sparse Mode (PIM-SM)