Fields
Status
Protocol
Example (Brief)
Dell#show ip interface brief
Interface
Status
TenGigabitEthernet 1/0
administratively down down
TenGigabitEthernet 1/1
administratively down down
TenGigabitEthernet 1/2
up
TenGigabitEthernet 1/3
up
TenGigabitEthernet 1/4
up
TenGigabitEthernet 1/5
up
TenGigabitEthernet 1/6
administratively down down
show ip management-route
View the IP addresses assigned to the Management interface.
Z9500
Syntax
show ip management-route [all | connected | summary | static]
Parameters
all
connected
summary
static
Command
•
Modes
•
976
Description
States whether the interface is enabled (up) or disabled
(administratively down).
States whether IP is enabled (up) or disabled (down) on the
interface.
Protocol
(OPTIONAL) Enter the keyword all to view all IP addresses
assigned to all Management interfaces on the switch.
(OPTIONAL) Enter the keyword connected to view only
routes directly connected to the Management interface.
(OPTIONAL) Enter the keyword summary to view a table
listing the number of active and non-active routes and their
sources.
(OPTIONAL) Enter the keyword static to view non-active
routes also.
EXEC
EXEC Privilege
IP-Address
OK? Method
unassigned
NO
unassigned
NO
unassigned
YES Manual
up
unassigned
YES Manual
up
unassigned
YES Manual
up
10.10.10.1
YES Manual
up
unassigned
NO
Manual
Manual
Manual
IPv4 Routing