Snmp Ifmib Ifalias Long - Dell Z9500 Command Reference Manual

Version
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
Example
Dell#show snmp user
Dell#

snmp ifmib ifalias long

Display the entire description string through the Interface MIB, which would be truncated otherwise to 63
characters.
Z9500
Syntax
snmp ifmib ifalias long
Defaults Interface description truncated beyond 63 characters.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
Example
!----command run on host connected to switch:------!
> snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -i
alias | more
IF-MIB::ifAlias.134530304 = STRING: This is a port connected
Simple Network Management Protocol (SNMP) and Syslog
Description
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
User name: v1v2creadu
Engine ID: 0000178B02000001E80214A8
storage-type: nonvolatile
Authentication Protocol: None
Privacy Protocol: None
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
active
1709