Show Interfaces Dampening - Dell Z9500 Command Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

show interfaces

show interfaces dampening

Display interface dampening information.

show interfaces dampening [[interface] [linecard slot-id]

[summary] [detail]]

linecard slot-id

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

— displays information on a specific physical interface or virtual

(Optional) Enter one of the following keywords and slot/port

or number information:

For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

Enter the linecard slot-id parameters to specify the

Z9500 ports on a line card. The range of slot IDs is from 0 to

(OPTIONAL) Enter the keyword summary to display the

current summary of dampening data, including the number

of interfaces configured and the number of interfaces

suppressed, if any.

(OPTIONAL) Enter the keyword detail to display detailed

interface dampening data.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.