Dell Z9500 Command Reference Manual page 1293

Parameters
tag
level-1
level-1-2
level-2
metric metric-
value
metric-type
type-value
route-map
map-name
tag tag-value
Defaults Not configured.
Command ROUTER OSPF
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.5.1.0
6.1.1.1
Open Shortest Path First (OSPFv2 and OSPFv3)
(OPTIONAL) Enter the name of the IS-IS routing process.
(OPTIONAL) Enter the keywords level-1 to redistribute
only IS-IS Level-1 routes.
(OPTIONAL) Enter the keywords level-1-2 to redistribute
both IS-IS Level-1 and Level-2 routes.
(OPTIONAL) Enter the keywords level-2 to redistribute
only IS-IS Level-2 routes.
(OPTIONAL) Enter the keyword metric then a number. The
range is from 0 (zero) to 4294967295.
(OPTIONAL) Enter the keywords metric-type then one of
the following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
(OPTIONAL) Enter the keywords route-map then the name
of the route map.
(OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPF. The range is from 0 to 4294967295.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the C-Series.
Introduced on the E-Series.
1293