Forward-Delay - Dell Z9500 Command Reference Manual

Version
7.5.1.0
6.2.1.1
Related protocol spanning-tree rstp
Commands

forward-delay

Configure the amount of time the interface waits in the Listening State and the Learning State before
transitioning to the Forwarding State.
Z9500
Syntax
forward-delay seconds
To return to the default setting, use the no forward-delay command.
Parameters
seconds
Defaults 15 seconds
Command CONFIGURATION RSTP (conf-rstp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Rapid Spanning Tree Protocol (RSTP)
Description
Introduced on the C-Series.
Introduced on the E-Series.
— enters SPANNING TREE mode on the switch.
Enter the number of seconds that the system waits before
transitioning RSTP to the forwarding state. The range is from
4 to 30. The default is 15 seconds.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1581