Dell Z9500 Command Reference Manual page 1326

RX 10
TX 10
OSPF Global Queue Length
Hello-Q
LSR-Q
Other-Q
Error packets (Only for RX)
Intf-Down
Wrong-Len
Auth-Err
Version
No-Buffer
Q-OverFlow 0
Error packets (Only for TX)
Socket Errors
Dell#
Usage The show ip ospf process-id statistics command displays the error
Information packet count received on each interface as:
•
•
•
•
•
•
•
•
Example
Dell(conf-if-te-1/6)#do show ip ospf statistics
(Statistics)
Interface TenGigabitEthernet 1/6
Dell(conf-if-te-1/6)#
1326
Total Error Hello DDiscr LSReq LSUpd LSAck
0 8
0 10
TxQ-Len RxQ-Len Tx-Mark Rx-Mark
0 0
0 0
0 0
0 Non-Dr
0 Invld-Nbr
0 MD5-Err
0 AreaMis
0 Seq-No
Unkown-Pkt 0
0
The hello-timer remaining value for each interface
The wait-timer remaining value for each interface
The grace-timer remaining value for each interface
The packet count received and transmitted for each neighbor
Dead timer remaining value for each neighbor
Transmit timer remaining value for each neighbor
The LSU Q length and its highest mark for each neighbor
The LSR Q length and its highest mark for each neighbor
Error packets (Receive statistics)
Intf-Down 0 Non-Dr 0 Self-Org 0
Wrong-Len 0 Invld-Nbr 0 Nbr-State 0
Auth-Error 0 MD5-Error 0 Cksum-Err 0
Version 0 AreaMisMatch 0 Conf-Issue 0
SeqNo-Err 0 Unknown-Pkt 0 Bad-LsReq 0
RtidZero 0
Neighbor ID 4.4.4.4
Packet Statistics
Hello DDiscr LSReq LSUpd LSAck
RX 5 2 1 3 2
TX 6 5 1 3 3
Timers
Hello 0 Wait 0 Grace 0
Dead 39 Transmit 4
Queue Statistics
LSU-Q-Len 0 LSU-Q-Wmark 1
LSR-Q-Len 0 LSR-Q-Wmark 1
2 0 0
0 0 0
0 2
0 0
0 0
0 Self-Org 0
0 Nbr-State 0
0 Chksum 0
0 Conf-Issues 0
0 Socket 0
Open Shortest Path First (OSPFv2 and OSPFv3)
0
0