Show Ip Ospf Database External - Dell Z9500 Command Reference Manual

LS age: 1437
Options: (No TOS-capability, No DC, E)
LS type: Summary Asbr
Link State ID: 103.1.50.1
Advertising Router: 1.1.1.10
LS Seq Number: 0x8000000f
Checksum: 0x8221
Length: 28
Network Mask: /0
LS age: 473
Options: (No TOS-capability, No DC, E)
LS type: Summary Asbr
Link State ID: 104.1.50.1
Advertising Router: 1.1.1.10
LS Seq Number: 0x80000010
Checksum: 0x4198
Length: 28
--More--
Related show ip ospf database
Commands

show ip ospf database external

Display information on the AS external (type 5) LSAs.
Z9500
Syntax
show ip ospf process-id database external [link-state-id] [adv-
router ip-address]
Parameters
process-id
link-state-id
adv-router ip-
address
Command
•
Modes
•
Open Shortest Path First (OSPFv2 and OSPFv3)
Summary Asbr (Area 0.0.0.0)
TOS: 0 Metric: 2
— displays OSPF database information.
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
(OPTIONAL) Specify LSA ID in dotted decimal format. The
LSA ID value depends on the LSA type, and it can be one of
the following:
• the network's IP address for Type 3 LSAs or Type 5 LSAs
• the router's OSPF router ID for Type 1 LSAs or Type 4
LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
(OPTIONAL) Enter the keywords adv-router and the ip-
address to display only the LSA information about that
router.
EXEC
EXEC Privilege
1303