Show Ipv6 Management-Route - Dell Z9500 Command Reference Manual

Number of CAM entries used by NBR entries = 0
Number of CAM entries used by Prefix entries = 1
Section
--------------------------------------
128
127
126
125
124
123
122
121
120
119
118
117
116
115
--More--

show ipv6 management-route

Display the IPv6 static routes configured for the management interface.
Z9500
Syntax
show ipv6 management-route [all | connected | summary | static]
Parameters
all
connected
summary
static
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1032
Current Use Initial Size
0 147519
0 63
0 63
0 63
0 63
0 63
0 63
0 63
0 63
0 63
0 63
0 63
0 63
0 63
(OPTIONAL) Enter the keyword all to view all IP addresses
assigned to all Management interfaces on the switch.
(OPTIONAL) Enter the keyword connected to view only
routes directly connected to the Management interface.
(OPTIONAL) Enter the keyword summary to view a table
listing the number of active and non-active routes and their
sources.
(OPTIONAL) Enter the keyword static to view non-active
routes also.
IPv6 Basics