Show Running-Config Lldp - Dell Z9500 Command Reference Manual

show running-config lldp

Display the current global LLDP configuration.
Z9500
Syntax
show running-config lldp
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
7.6.1.0
7.4.1.0
Example
Dell#show running-config lldp
!
protocol lldp
description
Dell#
LLDP-MED Commands
The following are the LLDP-MED (Media Endpoint Discovery) commands.
The Dell Networking OS LLDP-MED commands are an extension of the set of LLDP TLV advertisement
commands. The C-Series and S-Series support all commands.
Link Layer Discovery Protocol (LLDP)
Description
Introduced on the Z9500.
Introduced on the S8420T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
advertise dot1-tlv port-protocol-vlan-id port-vlan-id
advertise dot3-tlv max-frame-size
advertise management-tlv system-capabilities system-
hello 15
multiplier 3
no disable
1189