Show Logging - Dell Z9500 Command Reference Manual

Example
Dell(conf)#logging version ?
<0-1> Select syslog version (default = 0)
Dell(conf)#logging version 1

show logging

Display the logging settings and system messages logged to the internal buffer of the switch.
Z9500
Syntax
show logging [number | history [reverse][number] | reverse
[number] | summary]
Parameters
number
history
reverse
summary
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
Example
Dell#show logging
(Partial)
Syslog logging: enabled
1746
(OPTIONAL) Enter the number of messages displayed in the
output. The range is from 1 to 65535.
(OPTIONAL) Enter the keyword history to view only
information in the Syslog history table.
(OPTIONAL) Enter the keyword reverse to view the Syslog
messages in FIFO (first in, first out) order.
(OPTIONAL) Enter the keyword summary to view a table
showing the number of messages per type and per slot. Slots
*7* and *8* represent RPMs.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Console logging: level debugging
Monitor logging: level debugging
Buffer logging: level debugging, 97 Messages Logged, Size
Simple Network Management Protocol (SNMP) and Syslog