Privilege Level (Configuration Mode) - Dell Z9500 Command Reference Manual

privilege level (CONFIGURATION mode)

Change the access or privilege level of one or more commands.
Z9500
Syntax
privilege mode {level level command | reset command}
To delete access to a level and command, use the no privilege mode level
level command command.
Parameters
mode
level level
reset
command
Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
Security
Enter one of the following keywords as the mode for which
you are controlling access:
• configure for CONFIGURATION mode
• exec for EXEC mode
• interface for INTERFACE modes
• line for LINE mode
• route-map for ROUTE-MAP mode
• router for ROUTER OSPF, ROUTER RIP, ROUTER ISIS
and ROUTER BGP modes
Enter the keyword level then a number for the access level.
The range is from 0 to 15.
Level 1 is EXEC mode and Level 15 allows access to all CLI
modes and commands.
Enter the keyword reset to return the security level to the
default setting.
Enter the command's keywords to assign the command to a
certain access level. You can enter one or all of the
keywords.
Description
Introduced on the Z9500.
Introduced on the S4820T.
1607