Area Virtual-Link - Dell Force10 S4810P Reference Manual

Defaults Disabled.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage Use this command to configure all routers and access servers within a stub.
Information
Related
router ospf
Commands

area virtual-link

Set a virtual link and its parameters.
C-Series, E-Series, S-Series
Syntax area area-id virtual-link router-id [[authentication-key
[encryption-type] key] | [message-digest-key keyid md5
[encryption-type] key]] [dead-interval seconds] [hello-interval
seconds] [retransmit-interval seconds] [transmit-delay seconds]
To delete a virtual link, use the no area area-id virtual-link router-id
command.
To delete a parameter of a virtual link, use the no area area-id virtual-link
router-id [[authentication-key [encryption-type] key] |
[message-digest-key keyid md5 [encryption-type] key]] [dead-
interval seconds] [hello-interval seconds] [retransmit-interval
seconds] [transmit-delay seconds] command syntax.
Parameters
area-id
router-id
authentication-
key [
type ] key |
message-digest-
key
encryption-type ]
[
key
1146
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– enters ROUTER OSPF mode to configure an OSPF instance.
Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a
number from zero (0) to 65535.
Specify an ID (IP address in dotted decimal format) associated with a
virtual link neighbor.
(OPTIONAL) Choose between two authentication methods:
encryption-
•
keyid md5
•
Enter the keywords authentication-key to enable
simple authentication followed by an alphanumeric string up
to eight characters long. Optionally, for the encryption-
type variable, enter the number seven before entering the
key string to indicate that an encrypted password will
follow.
Enter the keywords message-digest-key followed by a
number from 1 to 255 as the keyid. After the keyid, enter