Fefd - Dell Force10 S4810P Reference Manual

Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.3.12.0
Legacy E-Series
command.
Related
Commands

fefd

Enable far-end failure detection on an interface.
E-Series, Z-Series, S4810
Syntax fefd
To disable FEFD on an interface, use the no fefd command.
Defaults Disabled.
Command Modes INTERFACE
Command History
Version 8.3.11.1
Version 8.3.12.0
Legacy E-Series
command.
Usage When you enter no fefd for an interface and fefd-global, FEFD is enabled on the interface
Information because the no fefd command is not retained in the configuration file. To keep the interface
FEFD disabled when the global configuration changes, use the fefd reset command.
Related
Commands
1060
•
•
Introduced on the Z9000.
Introduced on the S4810.
• fefd – enables far-end failure detection on an interface.
• fefd reset – enables FEFD globally on the system.
Introduced on the Z9000.
Introduced on the S4810.
• fefd disable – disables far-end failure detection on an interface.
• fefd reset – enables FEFD globally on the system.
• fefd mode – changes FEFD mode on an interface.
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/ port information.