Ip Ssh Hostbased-Authentication - Dell Force10 S4810P Reference Manual

Parameters
1-10
Defaults 10 per minute
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0

ip ssh hostbased-authentication

Enable hostbased-authentication for the SSHv2 server.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip ssh hostbased-authentication enable
To disable hostbased-authentication for SSHv2 server, use the no ip ssh hostbased-
authentication enable command.
Parameters
enable
Defaults Disabled.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage
If you enable this command, clients can login without a password prompt. This provides two
Information
levels of authentication:
Enter the number of maximum number of incoming SSH connections
allowed per minute. The range is 1 to 10 per minute. The default is 10
per minute.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the keyword enable to enable hostbased-authentication for
SSHv2 server.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
• rhost-authentication is done with the file specified in the ip ssh rhostfile
command.
1445