Mac Learning-Limit Reset; Show Cam Mac Linecard (Count) - Dell Force10 S4810P Reference Manual

Usage This is supported on physical interfaces, static LAGs, and LACP LAGs.
Information
Related show mac learning-limit
Commands

mac learning-limit reset

Reset the MAC address learning-limit error-disabled state.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax mac learning-limit reset
Defaults none
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.7.1.0
Version 7.5.1.0

show cam mac linecard (count)

Display the content addressable memory (CAM) size and the portions allocated for MAC addresses and for MAC ACLs.
E-Series, S4810
Syntax show cam mac linecard slot port-set port-pipe count [vlan vlan-
id] [interface interface]
Parameters
linecard
port-set
count
interface
interface
– displays details of the mac learning-limit.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
slot
(REQUIRED) Enter the keyword linecard followed by a slot number
to select the linecard for which to gather information. The E-Series
range is 0 to 6.
port-pipe (REQUIRED) Enter the keywords port-set followed by a Port-Pipe
number to select the Port-Pipe for which to gather information. The E-
Series range is 0 or 1.
(REQUIRED) Enter the keyword count to display CAM usage by
interface type.
(OPTIONAL) Enter the keyword interface followed by the
interface type, slot and port information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
1037