Advertise Med Power-Via-Mdi; Advertise Med Softphone-Voice - Dell Force10 S4810P Reference Manual

advertise med power-via-mdi

Configure the system to advertise the Extended Power via MDI TLV.
C-Series, S-Series, S4810
Syntax advertise med power-via-mdi
To return to the default, use the no advertise med power-via-mdi command.
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Usage Advertise the Extended Power via MDI on all ports that are connected to an 802.3af powered,
Information LLDP-MED endpoint device.
Related
debug lldp interface
Commands
show lldp neighbors
show running-config lldp

advertise med softphone-voice

Configure the system to advertise softphone to enable IP telephony on a computer so that the computer can be used as
a phone.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax advertise med softphone-voice {vlan-id layer2_priority
DSCP_value} | {priority-tagged number}
To return to the default, use the no advertise med softphone-voice {vlan-id
layer2_priority DSCP_value} | {priority-tagged number} command.
Parameters
vlan-id
layer2_priority
DSCP_value
priority-tagged
number
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
– debugs LLDP.
– displays the LLDP neighbors.
– displays the LLDP running configuration.
Enter the VLAN ID. The range is 1 to 4094.
Enter the Layer 2 priority (C-Series and E-Series only). The range is 0
to 7.
Enter the DSCP value (C-Series and E-Series only). The range is 0 to
63.
Enter the keywords priority-tagged followed the Layer 2
priority. The range is 0 to 7.
1081