Hello-Time - Dell Force10 S4810P Reference Manual

Version 7.5.1.0
pre-Version
6.2.1.1
Related
max-age
Commands

hello-time

hello-time
Set the time interval between generation of the spanning tree bridge protocol data units (BPDUs).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax hello-time seconds
To return to the default value, use the no hello-time command.
Parameters
seconds
Defaults 2 seconds
Command Modes SPANNING TREE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Related
forward-delay
Commands
max-age
Introduced on the C-Series.
Introduced on the E-Series.
– changes the wait time before STP refreshes protocol configuration information.
– changes the time interval between BPDUs.
Enter a number as the time interval between transmission of BPDUs.
The range is 1 to 10. The default is 2 seconds.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– changes the wait time before STP transitions to the Forwarding state.
– changes the wait time before STP refreshes protocol configuration information.
1543