pre-Version
6.1.1.1
Related
rate police
Commands
qos-policy-input
rate-shape
Shape traffic output as part of the designated policy.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
rate-shape [kbps] rate [burst-KB]
Parameters
kbps
rate
burst-KB
Defaults
Burst size is 10 KB. Granularity for rate is Mbps unless you use the kbps option.
Command Modes
QOS-POLICY-OUT
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage
rate-shape can be applied only as an aggregate policy. If it is applied as a class-based
Information
policy, rate-shape does not take effect.
On 40-port 10G linecards, if the traffic is shaped between 64 and 1000 Kbs, for some values the
shaped rate is much less than the value configured. Do not use values in this range for 10G
interfaces.
Related
rate shape
Commands
qos-policy-output
Introduced on the E-Series.
– specifies traffic policing on the selected interface.
– creates a QoS output policy.
Enter the keyword kbps to specify the rate limit in Kilobits per
second (Kbps). On C-Series and S-Series, make the following value a
multiple of 64. The range is 0 to 10000000. The default granularity is
Megabits per second (Mbps).
Enter the outgoing rate in multiples of 10 Mbps. The range is 10 to
10000.
(OPTIONAL) Enter the burst size in KB. The range is 0 to 10000. The
default is 10.
Introduced on the Z9000.
Introduced on the S4810.
Added the kbps option on the C-Series, E-Series, and S-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– shapes traffic output as part of the designated policy.
– creates a QoS output policy.
1329