Default-Metric; Description - Dell Force10 S4810P Reference Manual

Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Related redistribute
Commands

default-metric

Change the metrics of redistributed routes to a value useful to OSPF. Use this command with the redistribute
command.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax default-metric number
To return to the default values, use the no default-metric [number] command.
Parameters
number
Defaults Disabled.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Related redistribute
Commands

description

Add a description about the selected OSPF configuration.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax description description
To remove the OSPF description, use the no description command.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– redistributes routes from other routing protocols into OSPF.
Enter a number as the metric. The range is 1 to 16777214.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– redistributes routes from other routing protocols into OSPF.
1153