Tacacs-Server Key - Dell Force10 S4810P Reference Manual

If you are not configuring the switch as a TACACS+ server, you do not need to configure the
port, timeout and key optional parameters. If you do not configure a key, the key assigned
in the tacacs-server key command is used.
Related
aaa authentication login
Commands

tacacs-server key

tacacs-server key
Configure a key for communication between a TACACS+ server and a client.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax tacacs-server key [encryption-type] key
To delete a key, use the no tacacs-server key key command.
Parameters
encryption-type
key
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Usage The key configured with this command must match the key configured on the TACACS+
Information daemon.
1432
– specifies the login authentication method.
– configures a TACACS+ key for the TACACS server.
(OPTIONAL) Enter either zero (0) or 7 as the encryption type for the
key entered. The options are:
• 0 is the default and means the key is not encrypted and
stored as clear text.
• 7 means that the key is encrypted and hidden.
Enter a text string, up to 42 characters long, as the clear text
password. Leading spaces are ignored.
Introduced on the Z9000.
Introduced on the S4810.
Authentication key length increased to 42 characters.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.