Show Vrrp Ipv6 - Dell Force10 S4810P Reference Manual

bfd
database
packets
state
timer
Command Modes EXEC Privilege
Command History
Version 8.4.1.0
Version 8.3.10.0
Version 8.3.2.0
Usage If no options are specified, debug is active on all interfaces and all VRRP groups.
Information

show vrrp ipv6

View the IPv6 VRRP groups that are active. If no VRRP groups are active, the FTOS returns No Active VRRP
group.
C-Series, E-Series, S-Series, S4810
Syntax show vrrp ipv6 [vrid] [interface] [brief]
Parameters
vrid
interface
1628
Enter the keyword bfd to enable debugging of all VFFP BFD
interactions.
Enter the keyword database to display changes related to group,
prefix, and interface entries in the VRRP table.
Enter the keyword packets to enable debugging of VRRP control
packets.
Enter the keyword state to enable debugging of VRRP state
changes
Enter the keyword timer to enable debugging of the VRRP timer.
Introduced on E-Series ExaScale, C-Series, and S-Series. Support
was added for IPv6 VRRP groups in non-default VRF instances.
Introduced on the S4810.
Introduced on the E-Series TeraScale.
(OPTIONAL) Enter the virtual router identifier for the VRRP group to
view only that group. The range is 1 to 255.
Enter the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel followed by a number. For the E-Series, the range
is 1 to 255 for TeraScale.
• For SONET interfaces, enter the keyword sonet followed by
the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a VLAN interface, enter the keyword vlan followed by
the VLAN ID. The VLAN ID range is from 1 to 4094.